 Installation
|
These series of roller shutter doors are featured with easy and convenient installation, no space at the top of the building will be occupied by the door.
Heat insulation, elegant, durable and anti-fading.
There are many ways to set up the doors: manual, electric, or wireless control, and storage power can be mounted.
The door will stop if any obstacles are met. Besides, the door is anti-prizing.
Manually start the door if the power id off. The clutch device outside can be used to open the door easily. |
| |
|
| |
 Electric control-assembling scheme(tubular motor)
|
 |
| 1. Endplate |
6. Steel spring retainer |
11. Safety plate |
16. profile |
| 2. Ball bearing |
7. Upper box |
12. Emiller |
17. Alu.endslat |
| 3. Shaft end |
8. Bottom box |
13. Receiver |
18. Insert |
| 4. Screw |
9. Motor |
14. Guide |
19. Slat inlet |
| 5. Fitting ring |
10. Oct steel shaft |
15. Stopper |
20. Guide cap |
|
| |
Strap control-assembling scheme
|
 |
| 1. Endplate |
6. Oct steel shaft |
11. Strap pulley |
16. Stopper |
| 2. Slat inlet |
7. Steel spring retainer |
12. Internal inlet |
17. Profile |
| 3. Safety plate |
8. Fitting ring |
13. External inlet |
18. Alu.endslat |
| 4. Upper box |
9. Shaft end |
14. Strap coiler |
19. Insert |
| 5. Bottom box |
10. ball bearing |
15. Guide |
|
|
| |
