 Z47-12/4 Mnlti-Station Automatic Cold Former
|
| |
 |
| |
 The features of these products:
|
1.The upsetting station is arranged horizontally.
2.Take the open-closed clamp for conveying the work pieces, and the open-closed time of each clamp can be adjusted separately.
3.Take complete round sleeve cutting knife, and the notch is flat.
4.Take connecting rod type for the transmission of main actuating mechanism (cutting, female die pushing-out, feeding etc.)
5.Meet the requirements of feeding with large disk.
6.With thread rolling machine, it can carry out the one-line automated production from cutting, upsetting to thread rolling for bolts and screws.
7.The third stations, female die pushing-out can be used in the edge-cutting process and upsetting process and it also can be changed and adjusted conveniently.
8.Each station is equipped with punch push out mechanism which can be adjusted separately.
9.It is equipped with clutch and brake controlled pneumatically, which can make the main motor be started without load with flexible in-ching,make the machine tool debugging convenient, and make the main slide block stop at the hack dead point automatically. |
| |
Technical Specifications
|
| |
| Nominal pressure |
ton |
85 |
| Main motor power |
Kw |
15 |
| Main slider stroke |
mm |
150 |
| Max cut-off diameter |
mm |
10 |
| Welding part length |
mm |
16-100 |
| Max feeding length |
mm |
120 |
| Productive efficiency |
ppm |
95-190 |
| Heading position number |
|
3(cutting- off excluded) |
| Position interval |
mm |
80 |
| Net weight |
Kg |
14800 |
| Outer size (L×W×H) |
mm |
|
|
|
